1 9
11
12
E
STOP
NOTE: To install the cutting wheel see “Mounting the cutting
wheel”.
F
Cleaning / changing the air filter
Turn the cover lock (11) to the “Unlocked ” position and
carefully remove the filter cover (12).
There is an O-ring (G/15) between the filter cover (12) and the
air filter hood (G/14).
G
Unscrew the screws (13) and remove the air filter hood (14).
Clean the O-ring (15) with a brush and inspect for damage.
13
14
15
H
Remove the foam prefilter (17) from the filter cover.
Pull the paper cartridge (18) from the hood.
Remove the inner filter (16) from the intake opening.
Note:
Do not allow dirt to get into the carburetor!
Switch the combination switch to “Choke” or cover the
carburetor with a clean cloth.
16
17
18
STOP
Cleaning the protection hood
Over time, the inside of the protective hood can become caked
with material residue (especially from wet cutting), which if
allowed to accumulate can hinder the free rotation of the
cutting disc. For this reason the hood must be cleaned out from
time to time.
Take off the cutting wheel with spring washer and remove the
accumulated material from inside the hood with a strip of wood
or similar implement.
Clean the shaft and all disassembled parts with a cloth.