1 0
Maintenance
-
Before performing maintenance work switch off the
SpeediCut (27) and pull off the plug cap.
-
Always check the SpeediCut before using it to make sure that
it is in good working order. In particular, make sure that the
cutting disc is properly mounted. Make sure that the cutting
wheel is undamaged and suitable for the job it will be used for.
-
Operate the SpeediCut only at a low noise and emission level.
For this ensure the carburetor is adjusted correctly.
-
Clean the SpeediCut regularly.
-
Check the fuel tank cap regularly for good sealing.
Observe the accident prevention instructions issued by
trade associations and insurance companies. NEVER make
any modifications to the SpeediCut! You will only be
putting your own safety at risk!
Perform only the maintenance and repair works described in
the instruction manual. All other work must be carried out by
Diamond Products Service.
Use only original Diamond Products spares and accessories.
The use of non-Diamond Products spares, accessories, or
cutting discs increases the risk of accident. We cannot accept
any responsibility for accidents or damage occurring in
association with the use of cutting discs or accessories other
than original Diamond Products.
First aid
For the event of a possible accident, please make sure that a
first aid kit is always immediately available close by.
Immediately replace any items used from the first aid box.
When calling for help, give the following information:
- Place of the accident
- What happened
- Number of injured people
- Kind of injuries
- Your name!
NOTE
Individuals with poor circulation who are exposed to excessive
vibration may experience injury to blood vessels or the nervous
system.
Vibration may cause the following symptoms to occur in the
fingers, hands or wrists: “Falling asleep” (numbness), tingling,
pain, stabbing sensation, alteration of skin color or of the skin.
If any of these symptoms occur, see a physician!
27
28
29
SERVICE
STOP