Dialogic
®
DSI SS7G41 Signaling Server – SIU Mode Release Notes
Release 2.2.9
15
3.5
LIU Control
This release provides the ability for test purposes to dynamically control Line
Interface Unit operation on E1/T1 interface ports. The Maintenance PCM Set
(MNPCS) MMI command allows the setting of diagnostic loopbacks,
generation of AIS and generation of PRBS data on the interface. The
command syntax is:
MNPCS:PORTID=[,AISGEN=][,LOOPMD=][,PRBSGEN=];
Current settings for the AISGEN, LOOPMD and PRBSGEN are displayed on the
PCM Status (STPCP) command. Modifications to the default values for the
parameters are not preserved over a system restart.
3.6
MSSLP Command - SIGTRAN Link Measurements
This release corrects the measurement period reported on page 2 of the
MSSLP command following change of system time.
3.7
STSTP Command – SIGTRAN Link Status
Page 2 of the SIGTRAN Link Status command (STSTP) has been enhanced to
include the status of implicitly configured paths (configured within the SCTP
INIT or INIT ACK). It also reports additional per-path attributes.
3.8
SCCP - Dynamic Global Title Configuration
This release corrects the operation of dynamic Global Title Configuration to
preserve the sequence in which entries in the table are used irrespective of
the sequence in which they are added. The entry with the lowest GTPID value
is always used first.
3.9
MAP – Update Location Data (IPY00116450)
This release corrects handling of the Update Location service to ensure that
any unexpected or unsupported parameters data from a received message
are passed to the user in the MAPPN_ellipsis parameter.
3.10
MAP – Reporting of User Error codes (IPY00116444)
This release corrects the reported User Error Code values when TCAP Reject
components are received with Invoke problem codes of ‘Initiating Release’ or
‘Resource Limitation’. The respective codes MAPUE_initiating_release (38)
and MAPUE_resource_limitation (37) are now used.
3.11
MAP – Authentication Data Ellipsis revised
Coding of the responses for SEND-AUTHENTICATION-INFO-ACK and SEND-
IDENTIFICATION-ACK has been corrected. A new parameter
MAPPN_auth_set_list_ellipsis (737) is used for AuthenticationSetList table
data and the MAPPN_ellipsis parameter is used for top-level response results
tables for both services.
The MAPPN_send_auth_info_resp_ellipsis parameter is now obsolete and
code (652) is no longer used. Applications that use MAPPN_ellipsis and/or
MAPPN_send_auth_info_resp_ellipsis with these service responses should be
reviewed and re-compiled with the new header file. Full details are contained
in
MAP Programmer’s Manual
.
