Dialogic BN500IP, Руководство по установке и настройке, Страница: 37 / 46

Configuring Dialogic® Diva® SIPcontrol™ Network Interfaces
Page 37
3. In the Network Interfaces section, set the listen ports to 9803. All SIP traffic from the SIParator to Diva
SIPcontrol will come in through this port. For example:
4. Configure at least one SIP peer, as described in Configuring SIP Peers on page 37.
5. Configure at least one SIP --> PSTN route and one PSTN --> SIP route, as described in Configuring Routes
on page 38.
6. Click Save to save the settings.
Configuring SIP Peers
A SIP peer is a specific endpoint to and from which Diva SIPcontrol will establish calls. You can use peer-specific
settings to adapt Diva SIPcontrol’s behavior towards this peer.
To configure a SIP peer, follow these steps:
1. From the main Diva SIPcontrol web interface page, click SIP Peers:
The SIP Peers options appear:
2. Do either of the following:
• To change a SIP peer’s definition, click Details on the right side of the SIP peer’s row, make the appropriate
changes to the options, and then click OK.
• To add a new SIP peer, click Add, make appropriate changes to the options, and click OK.
For more information about options for defining SIP peers, see the Dialogic
®
BorderNet™ 500 Gateways
Reference Guide.