manualshive.com logo in svg

Dialogic 4000 Media Gateway Series, Справочное руководство

Поделиться
Скачать
Dialogic 4000 Media Gateway Series Скачать руководство пользователя страница 97

 

Dialogic® 4000 Media Gateway Series Reference Guide

page 97

9.

Restart the SNMP Service. To do so, right-click 

SNMP Service 

in the 

Services

 window and select 

Restart

 

from the list.

10.

Close the 

Services

 window.

To verify the function of the SNMP Service

1.

Click 

Start

 > 

Run

 and type 

cmd

 to open a DOS window.

2.

In the DOS window type: 

snmpwalk -v 2c -c public localhost interface | find_"Diva"

The result should be similar to the following, which is for a Dialogic

®

 Diva

®

 V-4PRI Media Board:

IF-MIB::ifDescr.101 = STRING: Dialogic_Diva_V-4PRI/E1/T1_1030
IF-MIB::ifDescr.133 = STRING: Dialogic_Diva_V-4PRI/E1/T1_1030
IF-MIB::ifDescr.164 = STRING: Dialogic_Diva_V-4PRI/E1/T1_1030
IF-MIB::ifDescr.195 = STRING: Dialogic_Diva_V-4PRI/E1/T1_1030

3.

In the DOS window type: 

snmptrapd -f -L o

The result should be similar to the following:

2006-01-28 11:14:35 NET-SNMP version 5.2.1.2 Started.

You can create an output of traps if you change the status of the layer 1/2, for instance by disconnecting 
the cable from the Diva Media Board. The result after changing the status of layer 1/2 should be similar to 
the following:

2006-01-28 11:16:25 localhost [127.0.0.1] (via UDP: [127.0.0.1]:1053) TRAP, SNMP v1, community public

        SNMPv2-SMI::enterprises.434.2 Link Up Trap (0) Uptime: 1:16:47.06

        IF-MIB::ifIndex.101 = INTEGER: 101

SNMPv2-SMI::enterprises.434.2 Link Down Trap (0) Uptime: 1:16:48.57

        IF-MIB::ifIndex.101 = INTEGER: 101

2006-01-28 11:16:26 localhost [127.0.0.1] (via UDP: [127.0.0.1]:1053) TRAP, SNMP v1, community public

        SNMPv2-SMI::enterprises.434.2 Link Up Trap (0) Uptime: 1:16:48.81

        IF-MIB::ifIndex.101 = INTEGER: 101

Supported MIBs, OIDs, and traps

This section provides information about supported MIBs, OIDs, and traps by the Dialogic

®

 Diva

®

 SNMP service 

and about the relationship between supported OIDs and Dialogic

®

 Diva

®

 Media Board management interface 

variables.

MIB-II (RFC 
1213/2233)

Path

Description

MIB-II

interfaces.ifTable.ifEntry.

ifIndex

Unique index of Dialogic

®

 Diva

®

 interfaces starting with 

ifIndex- 1 (see option -oN). First, all installed 
Dialogic

®

 Diva

®

 Media Boards are listed, followed by the 

available B-channels.

ifDescr

For Diva Media Boards, the board name and it's serial number 
are returned. For B-channels, the string "BRI + 
ifIndex_of number_of_b- channel_on_board" is 
returned.

ifType

The type of the interface according to IANA: PRI, BRI, ISDN.

ifMTU

Since the concept of MTU is not applicable on Dialogic

®

 Diva

®

 

interfaces, they return always 0.

ifSpeed

The maximum interface speed in bps

ifAdminStatus

Always up

ifOperStatus

The current operating status of the interface

Содержание 4000 Media Gateway Series













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды