Dialogic 4000 Media Gateway Series Скачать руководство пользователя страница 12

Страница: 12 / 108

Feature Overview

page 12

Enhanced routing

• Defines which CAPI controller is used for which calls from SIP

• Increased flexibility of load balancing and failover functionality; load balancing and failover can be used

together and are available for calls to the PSTN as well

• Number-based routing also available for calls to the PSTN

• Matching rules for number-based routing can contain regular expressions

• Routing based on calling or redirected number, the redirected number is only available for calls from the PSTN

Enhanced address manipulation

• Define the number manipulation on three different stages of the call routing (inbound, route selection,

outbound)

• Unlimited number of regular expressions for number manipulation at each stage of call routing

• Different dialplans can be entered for each controller and each SIP peer, which can ease the deployment in

an environment with multiple locations

Dialogic

Diva

Media Board features

This list includes only features relevant for the Dialogic

4000 Media Gateways. If you are interested in the

complete list of features, consult the Dialogic

Diva

System Release Reference Guide available at:

www.dialogic.com/manuals

General features

• Support for the ISDN basic rate interface (BRI), the ISDN primary rate interface (PRI), the channelized E1

interface, and the channelized T1 interface

• Support for fractional PRI, E1, and T1 lines

• Support for multiple PRI, E1, and T1 lines

• Automatic Diva Media Board detection

• Support for ISDN lines with a transfer rate of 64 kbps or 56 kbps (for example some regions in the USA)

• Support for channelized T1 lines with a transfer rate of 56 kbps (see

Channelized T1 (robbed bit signaling)

on page 14)

• Support for unchannelized lines with a transfer rate of 64 kbps or 56 kbps

• Support for R2 signaling E1 lines with a transfer rate of 64 kbps

• Support for up to 120 B-channels

• Support for all known switch types (ISDN protocols)

• Support for Q.SIG protocol (see

Q.SIG features

on page 14)

• Additional security through support of RSA

• Dialogic

Diva

V-PRI Multiport Media Boards: Creation of a trace message in the trace file if maximum

operation temperature is exceeded.

• Support for collecting phone number ranges or a specific number on incoming calls by the software.

• Support for a wide range of Windows

event logs. Driver and connection errors and informative messages

are listed in the MOM (Microsoft

Operation Manager). For a detailed description of the errors and messages

see the Dialogic

Diva

Configuration Manager Online Help file (DSMain.chm).

• Support for call deflection or call rerouting

• Support for redirecting number emulation (for incoming calls). In this case, the called party number is

delivered as redirecting number to the application.

• ECT Link Balance: To avoid confusion with call transfer and multiple incoming calls, each incoming call is

delivered to a separate TEI. This feature is only valid for Dialogic

Diva

BRI Media Boards and

Point-to-Multipoint interfaces.

Содержание 4000 Media Gateway Series













































































































Результаты поиска

Содержание 4000 Media Gateway Series

Отзывы:

Бренды по названию

Популярные бренды

Dialogic 4000 Media Gateway Series, Справочное руководство

Результаты поиска

Содержание 4000 Media Gateway Series

Отзывы:

Бренды по названию

Популярные бренды