Dialogic® Diva® SIPcontrolTM Software Configuration
page 26
Address Normalization
You may configure the parameters shown in the graphic and explained below:
Authentication
You may configure the parameters shown in the graphic and explained below:
Dialplan:
Select the local dialplan to be used by the dialplan module of the Dialogic
®
Diva
®
SIPcontrol
TM
Software. Configure the local dialplan under
as described on page 32 before you select
it here.
The dialplan selected here applies only to outgoing calls.
Number format
(outbound):
This parameter determines the shortest format allowed that is sent in calls to this SIP peer. You
may modify this parameter only if you selected a dialplan from the drop down menu. The following
options are available:
Unchanged
: The number signaled in the SIP message will be used unchanged for dialing.
International number
: The number is always converted to an international number, including
country and area code.
National number
: The number is converted to a national number unless it is an international
number with a different country code.
Extension:
The number is reduced as much as possible. An internal number is reduced to its
extension only.
For more information about number formats, see
Number Processing With The Dialogic® Diva®
Encoding
(outbound):
Determines if numbers in calls to this SIP peer should either be encoded as unknown number with
national or international prefix digits or as national or international number with type flags.
Address map
inbound:
Name of the regular expressions list applied to the addresses received on calls from this SIP peer.
See
on page 35 for more information about setting up a regular expression list.
Regular expressions may be used to add or remove dial prefixes required by a PBX or to rewrite
public phone numbers of different number ranges into a common format. See the
Address map
outbound:
Select the name of a regular expression list to be applied on calls to this SIP peer. See
on page 35 for more information about setting up a regular expression list.
Regular expressions may be used to add or remove dial prefixes required by a PBX or to rewrite
public phone numbers of different number ranges into a common format. See the
Realm:
A realm is a protection domain with its own user names and passwords. Enter the realm used by the
SIP peer for authentication. The realm entered here needs to be the same as the realm of the
endpoint.
Auth User Name:
Enter a user name to be used with this realm.
Password:
Enter the password to be used with this realm.
Содержание 4000 Media Gateway Series
Страница 1: ...www dialogic com Dialogic 4000 Media Gateway Series Reference Guide...
Страница 8: ...page 8...
