UM-B-049
DA14585/DA14586 Getting Started Guide with the PRO-Development Kit
User Manual
Revision 2.1
21-09-2018
CFR0012-00 Rev 2
24 of 30
© 2018 Dialog Semiconductor
The barebone application does not use the UART and so the only jumpers required are those for
the debugger interface as noted in
Table 3
.
4.
Use the Android application BLE Scanner to scan for, and connect to, the
DIALOG-BRBN
app,
see
Figure 30
.
Figure 30: Barebone BLE: Interacting with BLE Application
Your BLE application is now running and advertising using the default advertiser string: "DIALOG-
BRBN".
Note: In this example, we used an Android application but you can also use the LightBlue iOS
application to connect an iPad/iPod/iPhone device to the application.
Note:
When you c
hange the advertising name of your device and you don’t want your
iPhone/iPad... to connect to it anymore, it’s easy to make your device forget about it. Follow
easy steps mentioned in the
and your iPhone won’t remember your
Bluetooth device. If you change your mind, no worries, you can pair the device as though it
were new.
When multiple device use the same BD address in the same room test, it is highly
recommended to changes manually your BD address or use the static random address
(advanced) to avoid any conflict, You can refer to
