Dialog Semiconductor DA14586, Руководство пользователя

Страница: 25 / 30

UM-B-049
DA14585/DA14586 Getting Started Guide with the PRO-Development Kit
User Manual Revision 2.1 21-09-2018
CFR0012-00 Rev 2 25 of 30 © 2018 Dialog Semiconductor
9.2.1 Troubleshooting
If you can't see any blinky messages in your UART terminal and the LED is not blinking, check the
UART and LED jumper configuration, see
Table 2 .
Table 2: Blinky Example UART and LED Jumper Configuration
GPIO Function Jumper
P0_4 UART2 TX Connect J5.11 - J5.12
P0_5 UART2 RX Connect J5.13 - J5.14
P1_0 LED Connect J9.1
– J9.2
If you can't start a debug session, check the SWD debugger jumper configuration, see Table 3 .
Table 3: Blinky Example SWD Debugger Jumper Configuration
JTAG Function Jumper
TMS SWD IO Connect J5.25 - J5.26
TCK SWD CLK Connect J5.27 - J5.28
If you have trouble with the J-link firmware or any issue with SDK operation, refer to the DA1458x/68x
Development Kit J-Link Interface Application Note AN-B-052 .
Note: If none of these actions resolved the issue, please contact Dialog Software Forum.
9.2.2 What Next ?
This tutorial does not cover all the topics relevant to software development environments, it describes
the first steps necessary to get started with the Pro Development Kit. The following links provide more
information on DA14585/586:
•
DA14585 Product Brief
: To know more about the SmartBond™ DA14585 SoC.
•
DA14586 Product Brief
: To know more about the SmartBond™ DA14586 SoC.
•
UM-B-079: DA14585/586 SDK 6 Software Platform Reference : To know more about software
architecture.
•
UM-B-080: DA14585/586 SDK 6 Software
Developer’s Guide
: To build more BLE and peripheral
examples.
•
Codeless Tutorial : To quick start your IoT application and learn more about AT commands.
•
Sleep mode configurations and power measurement : To learn more DA14585/586 Power
management.
•
Application Hardware Design Guideline : To learn how to prepare schematics and PCB layouts
for your application.