14
A. Cleaning the charger
- Remove the handpiece from the charger. Disconnect the charger from the power adapter and
power supply. Clean the outer surface of the charger by wiping with a soft cloth dampened
with pH neutral surface disinfection solution or alcohol.
- Do not submerge the charger in disinfection liquids of any kind.
- It would be better to clean Charger contacts with Alcohol.
B. Cleaning the handpiece
- Remove the handpiece from the charger for cleaning. Clean the outer surface of the handpiece
by wiping with a soft cloth dampened with pH neutral surface disinfection solution or alcohol.
- Do not submerge the charger in disinfection liquids of any kind.
- It would be better to clean handpiece contacts with Alcohol.
C. Cleaning the inside of heat chamber
- Remove the tip by wrench and clean all visible soil from Gutta Percha Obturator in the heat
chamber with scrubbing brush. Melt the residual at 160
and clean it all.
D. Cleaning the safety cap
- After each use, steam it using a steam autoclave.
E. Cleaning the plunger
- Wipe it with a soft cloth dampened with alcohol.
A. Handpiece and charger disposal
- Remove battery pack before disposal. Dispose of electronic parts as electronic waste. Dispose
of all other parts according to the relevant regulations concerning waste disposal.
B. Battery pack disposal
- Dispose of the battery pack as chemical waste. Dispose in accordance with all applicable local
regulations
C. Tips disposal
- Dispose of needles as medical waste. Dispose in accordance with all applicable local
regulations
