Diablo 5000B, Руководство по началу работы

Страница: 33 / 48

Creating a Method
Diablo 5000B Real-Time Gas Analyzer Getting Started Manual 27
double-click the desired signal component in the signal tree. A small dialog appears that
allows you to choose from the raw signal, calibrated signal, calibration slope, or calibration
intercept.
4. For this example, we will create a calculation to allow normalized percent compositions to be
determined. For this calculation, we will need a sum of all the calibrated responses.
Double-click the Sig1: Water signal in the Components window and select the calibrated
signal response. Click OK and (Sig1.Cal) will appear in the Current Formula window.
Click the + button in the Operators window and select the next calibrated signal. Repeat this
procedure until all of the compound signals (signals 1 - 5) are added together (Figure 15).
Note: You can also drag and drop the desired signal component from the signal tree into
the formula.
Figure 15: The formula editor.
5. Confirm the function is valid by selecting the
“Check” button. If the formula is valid, a window
will appear stating that the expression is valid.
6. Click OK on the Edit Formula screen.
7. If this signal is desired in the real time plotting, check
“Create New Data Channel”.
8. Save your calculation.