manualshive.com logo in svg

Di-soric ID-08, Руководство пользователя

Поделиться
Скачать
Di-soric ID-08 Скачать руководство пользователя страница 61

ID-08 / ID-09 High Performance Imager – User´s Manual

5-3

Read Cycle

External Trigger

The 

External Trigger

 parameter allows you to determine reader behavior when triggered 

externally.

Show Target

The target LEDs will illuminate when the reader is triggered externally.

Read Both Fields (Default)

Both Near Field and Far Field will be activated to capture an image when the reader is triggered 
externally.

Read Near Field

Near Field will be activated to capture an image when the reader is triggered externally.

Read Far Field

Far Field will be activated to capture an image when the reader is triggered externally.

Read Primary Field

When 

Read Primary Field

 is selected, the most recent field to have produced a Good 

Read (Near Field or Far Field) will be activated to capture an image when the reader is 
triggered externally.

Trigger Active

When an external trigger is active, the reader will either decode once and stop or decode 
continuously, depending on how this parameter is set. 

Trigger Active

 is set to Read Once 

by default. 

Important: 

Ignore Duplicate Symbol Timeout

 should be set to a value greater than 0 

when Trigger Active is set to Continuous Read.

Содержание ID-08















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды