Di-soric ID-08 Скачать руководство пользователя

Страница: 33 / 174

ID-08 / ID-09 High Performance Imager – User´s Manual

2-15

Using di-soric ID - Software

Send/Receive

To access

Receive

Save

Lock

Default

, and

Advanced

options, click the

Send/Recv

button or right-click in the tree control areas..

You can also access these options by right-clicking in any of the configuration views.

Receive Reader Settings

From the

Send/Recv

menu, select

Receive Reader Settings.

This option is useful if you want to receive the reader’s settings and save them as a file for
later retrieval. For example, if your reader has settings that you do not want to change,
choosing

Receive Reader Settings

will allow you to load those settings to

ID-Software

and save them as an

ID-Software

file.

Receiving the reader’s settings also assures that you will not subsequently save any
unwanted configuration changes previously made in

ID-Software

Select this option if you want to upload the reader’s settings to

ID-Software

. For example,

if your

ID-Software

file has a number of custom settings that you want to maintain and

download to the reader, you will lose those

ID-Software

settings if you choose to receive

settings from the reader.

Save to Reader

Send, No Save

This saves

ID-Software

settings to current memory.

Send and Save

This activates all changes in current memory and saves to the reader.

Lock Reader

This locks in the most recently sent and saved configuration to the reader.

Содержание ID-08















































































































































































Результаты поиска

Содержание ID-08

Отзывы:

Похожие инструкции для ID-08

Бренды по названию

Популярные бренды

Di-soric ID-08, Руководство пользователя

Результаты поиска

Содержание ID-08

Отзывы:

Похожие инструкции для ID-08

Бренды по названию

Популярные бренды