DLPT2+
Operating Instructions
40
6 Maintenance
Clean only with a dry cloth; do not use solvents.
Before use, ensure unit is clean and dry; visually
inspect all leads, connectors, and case. Any
damage or wear must be rectified to preserve user
safety.
Check the battery contacts and compartment are
free of electrolytic contamination.
Any contamination of the battery contacts or
compartment should be cleaned with a dry cloth.
Note: The DLPT2+ contains no user serviceable
parts. If an
Error
warning should appear on the
display please contact the manufacturer or an
authorised DILOG Service Agent
for advise.
7 Battery Check
The DLPT2+ is powered from 6 AA cells which are
checked before a test is performed. When the
battery voltage is low the
enunciator is
illuminated. The unit will continue to perform within
specification for a limited number of tests,
dependent upon the type of the batteries fitted.
When the battery voltage reaches a level where the
performance is affected the
enunciator will
flash and all test keys are disabled. The batteries
must be replaced.
Содержание DLPT2+
