© 2004-2008 DH Instruments, a Fluke Company
High pressure liquids and gases are potentially hazardous. Energy stored in these liquids and gases
can be released unexpectedly and with extreme force. High pressure systems should be assembled and
operated only by personnel who have been instructed in proper safety practices.
© 2008 DH Instruments, a Fluke Company All rights reserved.
Information in this document is subject to change without notice. No part of this document may be reproduced or
transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written
permission of
DH Instruments, a Fluke Company
, 4765 East Beautiful Lane Phoenix AZ 85044-5318 USA.
DH Instruments
makes sincere efforts to ensure the accuracy and quality of its’ published materials; however,
no warranty, expressed or implied, is provided.
DH Instruments
disclaims any responsibility or liability for any direct
or indirect damages resulting from the use of the information in this manual or products described in it. Mention of
any product or brand does not constitute an endorsement by
DH Instruments
of that product or brand. This manual
was originally composed in English and was subsequently translated into other languages. The fidelity of the
translation cannot be guaranteed. In case of conflict between the English version and other language versions, the
English version predominates.
DH Instruments, DH, DHI,
E-DWT, GPC1, MPG2, MPG2-H, MPG2-H-HV, OPG1, PG7000, RPM4 are trademarks,
registered and otherwise, of
DH Instruments, a Fluke Company.
Document No. 3340765
080515
Printed in the USA
