background image

© MuxLab Inc.

5450 Cote de Liesse, Montreal

Quebec, Canada, H4P 1A5

Tel.: (514) 905-0588

Fax: (514) 905-0589

Toll Free (N.Am): (877) 689-5228

E-mail: [email protected]

URL: www.muxlab.com

94-000xxx-A

SE-000xxx-A

VideoEase Digital Audio Balun (500020)

Installation Guide

Introduction

The VideoEase Digital Audio Balun allows a digital audio source to be connected up to
600 feet (183m) away from a digital audio decoder/amplifier via copper unshielded
twisted pair (UTP) in a point-to-point scenario.  Used in pairs, the Digital Audio Balun
allows a Digital Audio source such as a DVD, VCR or satellite receiver to be connected
via copper twisted pair to a Digital Audio home theatre system.   The Digital Audio
Balun connects directly to the digital audio equipment and features screw terminals and
built-in cable strain relief for ease of installation and reliable connectivity.

Installation

 
 

To install the VideoEase Digital Audio Baluns, perform the following steps:

1.

 

Identify the pin configuration of the baluns.   One twisted pair is required.
Although the Digital Audio Balun is not reverse polarity sensitive, however in
the event that there may be ground loop problems in a particular installation, it
is recommended to ensure straight-through wiring (Ring to Ring, Tip to Tip).   

Digital Audio Balun (500020)
Top View (cover off)

Ring

Tip

RCA male

Ring

Tip

Twisted pair cable

1 pair

Отзывы: