DFI WL9A3, Руководство пользователя, Страница: 23 / 23

21
Chapter 2
HARDWARE INSTALLATION
User's Manual | WL9A3
GPIO Signals Descriptions
Signal Pin# Pin Type Pwr Rail /Tolerance WL9A3 Carrier Board Description
GPO0 A93 O CMOS 3.3V / 3.3V General purpose output pins.
GPO1 B54
GPO2 B57
GPO3 B63
GPI0 A54 I CMOS PU 100K to 3V3 General purpose input pins.
GPI1 A63
GPI2 A67
GPI3 A85
Power and GND Signal Descriptions
Signal Pin# Pin Type Pwr Rail /Tolerance WL9A3 Carrier Board Description
VCC_12V A104~A109
B104~B109
Power 4.75V – 20.0V 12V – 20V Primary power input: +12V nominal. All available VCC_12V pins on
the connector(s) shall be used. The module supplies a wide range
of power from 4.75V to 20.0V.
VCC_5V_SBY
B84~B87
Power 4.75V - 5.25V 4.75V - 5.25V Standby power input: +5.0V nominal. If VCC5_SBY is used, all
available VCC_5V_SBY pins on the connector(s) shall be used. Only
used for standby and suspend functions. May be left unconnected
if these functions are not used in the system design.
VCC_RTC A47 Power 2.0V - 3.3V 2.0V - 3.3V Real-time clock circuit-power input. Nom3.0V.
GND Pin Type: Power; Pin#: A1, A11, A21, A31, A41, A51, A57, A60, A66,
A70, A80, A90, A100, A110, B1, B11, B21 ,B31, B41, B51, B60, B70,
B80, B90, B100, B110
Ground - DC power and signal and AC signal return path.
All available GND connector pins shall be used and tied to Carrier
Board GND plane.