8
Chapter 2
HARDWARE INSTALLATION
User's Manual |
WL9A3
Chapter 2 - Hardware Installation
X
Board Layout
Important:
When the Standby Power LED on the carrier board lights up, it indicates that there
is power on the system board. Power-off the PC then unplug the power cord prior
to installing any devices. Failure to do so will cause severe damage to the mother-
board and components.
Important:
Electrostatic discharge (ESD) can damage your board, processor, disk drives,
add-in boards, and other components. Perform installation procedures at an ESD
workstation only. If such a station is not available, you can provide some ESD pro-
tection by wearing an antistatic wrist strap and attaching it to a metal part of the
system chassis. If a wrist strap is unavailable, establish and maintain contact with
the system chassis throughout any procedures requiring ESD protection.
Intel
BGA 1528
SPI Flash BIOS
Intel
I219LM
DDR3
DDR3
Bottom View
Top View
SIO
IT8528E
eMMC
PTN3460
COM Express B2B
DDR3
DDR3
Intel
BGA 1528
SPI Flash BIOS
Intel
I219LM
DDR3
DDR3
Bottom View
Top View
SIO
IT8528E
eMMC
PTN3460
COM Express B2B
DDR3
DDR3