58
Chapter 6
Chapter 6 Intel AMT Settings
www.dfi.com
5. Select
Change Intel(R) ME Password
then press Enter.
You will be prompted for a password. The default password is “
admin
”. Enter the default
password in the space provided under Intel(R) ME New Password then press Enter.
• 8-32 characters
• Strong 7-bit ASCII characters excluding
: ,
and
”
characters
• At least one digit character (0, 1, ...9)
• At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;)
• Both lower case and upper case characters
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1205
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
INTEL (R) ME PLATFORM CONFIGURATION
Change ME Password
Local FW Update <Enabled>
Intel (R) ME New Password
[
↑↓
] = Move Highlight [Enter] = Select Entry [Esc]= Exit
6. Select
Local FW Update
then press Enter. Select
Enabled
or
Disabled
or
password
Protected
then press Enter.
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1205
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
Change ME Password
Local FW Update
<Enabled>
[
↑↓
] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes
Disabled
Enabled
Password Protected
7. Select Previous Menu until you return to the
Main Menu
. Select
Intel(R) AMT Con-
figuration
then press Enter.
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1205
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
INTEL (R) AMT CONFIGURATION
[
↑↓
] = Move Highlight [Enter] = Select Entry [Esc]= Exit
Manageability Feature Selection
< Enabled>
> SOL/Storage Redirection/KVM
> User Consent
Password Policy <Anytime>
> Network Setup
Activate Network Access
Unconfigure Network Access <Full Unprovision>
> Remote Setup And Configuration
> Power Control
INTEL (R) ME PLATFORM CONFIGURATION
