www.dfi.com
19
Chapter 2 Hardware Installation
Chapter 2
LVDS LCD Panel Connector
LCD/Inverter Power Connector
The system board allows you to connect a LCD Display Panel by means of the
LVDS LCD panel connector and the LCD/Inverter power connector. These con-
nectors transmit video signals and power from the system board to the LCD
panel.
Refer to the table on the right side for the pin functions of these connectors.
BIOS Setting
Configure the system graphics and the LCD panel in the Advanced menu (the
“Video Configuration” submenu) of the BIOS. Refer to chapter 3 for more infor-
mation.
Pins
Function
Pins
Function
1
GND
2
GND
3
LV (Odd_3+)
4
LV ()
5
LVDS_Out3- (Odd_3-)
6
LVDS_Out7- (Even_3-)
7
GND
8
GND
9
LV (Odd_2+)
10
LV ()
11
LVDS_Out2- (Odd_2-)
12
LVDS_Out6- (Even_2-)
13
GND
14
GND
15
LV (Odd_1+)
16
LV ()
17
LVDS_Out1- (Odd_1-)
18
LVDS_Out5- (Even_1-)
19
GND
20
GND
21
LV (Odd_0+)
22
LV ()
23
LVDS_Out0- (Odd_0-)
24
LVDS_Out4- (Even_0-)
25
GND
26
GND
27
LV ()
28
LV (E)
29
LVDS_CLK1- (Odd_CLK-)
30
LVDS_CLK2- (Even_CLK-)
31
GND
32
GND
33
DDC_CLK
34
NC
35
DDC_DATA
36
+3.3V
37
Panel Power
38
Panel Power
39
Panel Power
40
Panel Power
LVDS LCD Panel Connector
LCD/Inverter Power Connector
Pins
Function
1
+12V
2
GND
3
Panel Backlight On/Off Control
4
Dimming Control
5
+5V
Note:
DFI board's LVDS connector: Hirose DF13-40DP-1.25V(91)/40P/1.25mm; cable side
connector: Hirose DF13-40DS-1.25C.
LCD/Inverter power
40
2
1
39
LVDS LC
Panel
