DFI SU251, Руководство пользователя

Страница: 32 / 69

Chapter 3
www.dfi.com
32
Chapter 3 BIOS Setup
Security
This section configures the trusted platform module (TPM) function.
Current TPM Device
TPM State
TPM Availability
TPM Operation
Clear TPM
Supervisor Password
Set Supervisor Password
Main Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility
Security Boot Exit
Rev. 5.0
When Hidden, don’t ex-
poses TPM to 0
<TPM 2.0>
Not Installed
<Available>
<No Operation>
[ ]
Not Installed
Available
Hidden
TPM Availability
TPM Availability
Show or hide the TPM availability and its configurations.
TPM Operation
Enable or disable the TPM function. It displays the following options:
No Operation: No changes to current state.
Disable: Disable and deactivate TPM.
Enable: Enable and activate TPM.
Clear TPM
Remove all TPM ownership contents.
Set Supervisor Password
Set the administrative password. The length of the password must be greater than one
character.
Install or Change the pass -
word and the length of
password must be greater
than one character.
Current TPM Device
TPM State
TPM Availability
TPM Operation
Clear TPM
Supervisor Password
Set Supervisor Password
Main Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility
Security Boot Exit
Rev. 5.0
<TPM 1.2>
Enabled and Activated, Owned
<Available>
<No Operation>
[X]
Not installed
Set Supervisor Password
Enter New Password:
Enter New Password Again: