Chapter 3
www.dfi.com
31
Chapter 3 BIOS Setup
COM Port 1 to COM Port 4
Configure the settings to use the serial port.
Disable
Disable this serial port.
Enable
Enable this serial port.
Base I/O Address
Choose the input/output base address for each COM port.
Interrupt
Assign the IRQ number for each COM port.
Type
Choose among RS23, RS422 and RS485 (Peer-to-Peer) for the serial communication
type for COM port 1 and COM port 2.
WDT
Enable or disable the watchdog function.
Case Open
Enable or disable the case open.
AC Power Loss
Set the AC power loss to Always off or on to indicate the system power on/off state
after the power resumes.
CPU Smart Fan Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
Type
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
WDT
Case Open
AC Power Loss
PC Health Status
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
<Enable>
[30]
[40]
[50]
[60]
[30]
[40]
[50]
[75]
<Enable>
<3F8>
<IRQ4>
<RS232>
<Enable>
<2F8>
<IRQ3>
<RS232>
<Enable>
<3E8>
<IRQ4>
<Enable>
<2E8>
<IRQ3>
<Disable>
<Disable>
<Always off>
Disabled
Enabled
COM Port 1
Configure Serial port using
options: [Disable] No Con
-
figuration [Enable] User
Configuration [Auto] EFI/
OS chooses configuration
PC Health Status
This section displays PC health status.
PC Health Status
Voltage
VCORE
5V
+12V
VDDQ
VBAT
3VSB
Temperature
System (
o
C/
o
F
)
CPU (
o
C/
o
F
)
Fan Speed
CPU FAN
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
0.960 V
4.978 V
12.320 V
1.360 V
3.056 V
3.312 V
30.0 C/ 86.0 F
38.5 C/ 101.3 F
7180 RPM
