2
Hardware Installation
43
2.7.25 Daughterboard Docking Connector
The system board is shipped with
the 3SM5 daughterboard already
installed onto the system board’s
daughterboard docking connector
(J10).
If, for some reasons, the system
board was shipped without the
3SM5 daughterboard or you need
to replace it with a new one,
please perfor m step 1 fir st,
otherwise, you may proceed
directly to step 2.
1. Remove the screw that secures the 3SM5 daughterboard to the
system board, then lift the daughterboard upward. Now align the
new/replaced daugherboard’s J1 connector over the system
board’s daughterboard docking connector (J10), at the same time
making sure the screw also aligns over the screw hole. Now
press the daughterboard down firmly and tighten the screw.
Proceed to step 2 on how to use the connectors on the
daughterboard.
2. The 3SM5 daughterboard, which is a LCD processor converter, is
used to interface the system board to your LCD panel. The
system board supports the following LCD panels.
Model
LM151X2/X4
LM150X06
FLC38XGC6V-06
Brand
15.1” LG
15” LG
15.1” Fujitsu
