2
Hardware Installation
29
2.7.10 Second Chassis Fan Connector
If you are installing a second chassis fan in the system unit, connect
the fan’s connector to location J19 on the system board. The system
is capable of monitoring the speed of the second chassis fan but
does not control its fan speed.
2.7.11 VGA Port
The system board can only be
used with an analog video monitor.
Connect the monitor’s 15-pin
D-shell cable connector to the VGA
port (CN3 - Blue) located at the
ATX double deck por ts of the
board. If your monitor suppor ts
analog video but does not have a
15-pin D-shell connector, see your
monitor dealer for the adapter or
optional cable. After you plug the
monitor cable into the VGA port,
gently tighten the cable screws to
hold the connector in place. Some
monitor s have a switch that
chooses between analog and TTL (or digital) operation. If your
monitor has such a switch, set it for analog.
Pin
1
2
3
Function
Ground
+12V
Sense
