2
18
Hardware Installation
2-3 On:
Clear CMOS Data
1-2 On: Normal
(default)
2.4 Jumper Settings for Wake-On-Keyboard/
Wake-On-Mouse
Wake-On-Keyboard/Wake-On-Mouse -
Jumper JP1
The Wake-On-Keyboard/Wake-On-
Mouse function allows you to use
the keyboard or PS/2 mouse to
power-on the system. By default, JP1
is disabled. To use this function, set
JP1 to 2-3 On. “Keyboard/Mouse
Power On” in the Integrated Periph-
erals submenu of the BIOS must be
set accordingly. Refer to chapter 3
for details.
Warning:
1. If JP1 was enabled with a
password set in the “KB Power On Password” field, and now
you wish to disable the keyboard password function, make
sure to set the “Keyboard/Mouse Power On” field to
Disabled prior to setting JP1 to disabled. You will not be able
to boot-up the system if you fail to do so.
2. The power button will not function once a keyboard
password has been set in the “KB Power On Password”
field of the Integrated Peripherals submenu. You must type
the correct password to power-on the system.
1
2
3
1
2
3
7. Press <Esc> to return to the main menu of the BIOS setup
utility. Select “Save & Exit Setup” and press <Enter>.
8. Type <Y> and press <Enter>.
