10
Chapter 2 Getting Started
www.dfi.com
Preparing the System
Before you start using the system, you need the following items:
•
SATA DOMs or M.2 modules
•
USB keyboard
•
USB mouse
•
CD-ROM drive (for installing software/drivers)
•
Screwdriver
•
Memory modules
Installing Devices
The following devices can be installed in the system.
•
Memory modules
•
SATA DOMs
•
M.2 modules
Configuring the BIOS
To get you started, you may need to change configurations such as the date, time and the pri-
ority of boot devices.
1. Power on the system.
2. After the memory test, the message “Press DEL to run setup” will appear on the screen.
Press the Delete key to enter the BIOS setup utility.
Installing an Operating System
Most operating system software can be installed using a DVD (and DVD burner) or bootable
USB drive.
Please refer to your operating system manual for instructions on installing an operating system.
Installing the Drivers
The system comes with a software package including drivers. These drivers must be installed to
provide the best system performance. Refer to the Supported Software Chapter for instructions
on installing drivers.
Chapter 2 - Getting Started
Chapter 2