G486-EVB
MEMORY SIZE HAS CHANGED SINCE LAST BOOT
Memory has been added or removed since the last boot.
Enter Setup and enter the new memory size in the
memory fields.
MEMORY VERIFY ERROR AT...
Indicates an error verifying a value already written to
memory. Use the location along with your system’s
memory map to locate the bad chip.
OFFENDING ADDRESS NOT FOUND
This message is used in conjunction with the I/O
CHANNEL CHECK and RAM PARITY ERROR
messages when the segment that has caused the problem
cannot be isolated.
OFFENDING SEGMENT
This message is used in conjunction with the I/O
CHANNEL CHECK and RAM PARITY ERROR
messages when the segment that has caused the problem
has been isolated.
PRESS A KEY TO REBOOT
This will be displayed at the bottom screen when an
error occurs that requires you to reboot. Press any key
and the system will reboot.
PRESS F1 TO DISABLE NMI, F2 TO REBOOT
When BIOS detects a Non-maskable Interrupt condition
during boot, this will allow you to disable the NMI and
continue to boot, or you can reboot the system with the
NMI enabled.
Appendix B
u
B-4
