Energy Star Compliant System Board
v
Troubleshooting
If you experience difficulty with the G486-EVB system
board, please refer to the checklist below. If you still
cannot isolate the problem, please contact your dealer.
1. Check the jumper settings to ensure that the jumpers
are properly set. If in doubt, refer to the “Board
Configuration” section.
2. Verify that all HSIM modules are seated securely
into the bank sockets.
3. Make sure that the HSIM modules are in the correct
location.
4. Make sure that the power source is delivering power
and is correctly connected.
5. Make sure that pin 1 of the CPU is in pin 1 of the
CPU socket.
6. If your board fails to function, place the board on a
flat surface and seat all socketed components (gently
press each component into the socket).
4-1
u
Troubleshooting
