Energy Star Compliant System Board
Note:
To support LBA or Large mode HDDs, there must be
some software involved. All of this software is included
in the Award HDD Service Routine (INT13h). It may
fail to access a HDD with LBA or Large mode selected
if you are running under an operating system which
replaces the entire INT13h.
Save & Exit Setup
When all the changes have been made, highlight “Save
& Exit Setup” and press <Enter>. The message below
will appear:
Save to CMOS and Exit (Y/N)? N
Type “Y” and press <Enter>. The following message
will appear:
Reboot System (Y/N)? N
Type “Y” and press <Enter>. The modifications you
have made will be written into the CMOS memory, and
the system will reboot. You will once again see the
initial diagnostics on the screen. If you wish to make
additional changes to the setup, press <Ctrl> <Alt>
<Esc> or <Del> after memory testing is done.
Exit Without Saving
When you do not want to save the changes you have
made, highlight this option and press <Enter>. The
message below will appear:
Quit Without Saving (Y/N)? N
3-14
u
Initial Setup Program
