www.dfi.com
14
Chapter 2 Hardware Installation
Chapter 2
USB Ports
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The system board is equipped with 2 onboard USB 2.0 ports (USB 1-2). The 6-pin connec-
tor allows you to connect 1 additional USB 2.0 port (USB 3). The additional USB port may be
mounted on a card-edge bracket. Install the card-edge bracket to an available slot at the rear
of the system chassis and then insert the USB port cables to a connector.
Pin Pin Name
1
5V
2
Data-
3
Data+
4
GND
5
NC
USB 2.0
USB 2
USB 1
USB 3
USB 2.0
1
2
5
4
Serial Port
The serial port provides 2-wire RS485 communication with support of auto flow control.
1 2
COM 1
Pin Pin Name
Pin Pin Name
1
RS485+
2
RS485-
3
