www.dfi.com
22
Chapter 3 Software User Guide
Chapter 3
7. After the burning is done, click “Stop“ and turn the power off.
8. Set the finger switch SW5 to the “eMMC Start Mode“: pins 1, 2, 5, 6, 8 on and 3, 4, 7 off.
9. Power-on the device again to reboot it into the system.
Boot Mode/Device Select
(SW5)
Pins 1, 2, 5, 6, 8 ON
ON
1 2 3 4 5 6 7 8
3. Unzip Image package on your PC.
4. Yocto image: execute “\\
[core type]
\yocto-emmc-fs053-
[core type]
-all.vbs”.
For example, for
DualLite
CPU, execute “\\
DualLite_core
\yocto-emmc-fs053-
DualLite
-all.vbs”.
Android image: execute “\\
[core type]
\android-emmc-fs053-
[core type]
-all.vbs”.
For example, for
DualLite
CPU, execute
“\\
DualLite_core
\android-emmc-fs053-
DualLite
-all.vbs”.
5. You will see the device connected as “HID-compliant device.”
6. After all preparation is done,
click “Start” to burn the file. Wait until the process ends.