www.dfi.com
12
Chapter 2 Hardware Installation
Chapter 2
Rear Panel I/O Ports
The rear I/O ports consist of the following:
• 1 9~36V DC-in 2-pin terminal block
• 2 USB 2.0 ports
• 2 LAN ports
• 1 serial (RS-485) port
• 1 HDMI port
• 1 USB 2.0 OTG port
9~36V DC-in
+
-
This 2-pin terminal block is considered a low power solution. Connect a DC power cord to this
terminal block. Using a voltage more than the recommended range may fail to boot the sys-
tem or cause damage to the system board.
Terminal Block
USB 2.0
HDMI
USB 2.0 OTG
DC-in
COM 1
LAN 1
LAN 2
+
-
