www.dfi .com
12
Chapter 2 Hardware Installation
Chapter 2
I/O Ports
The I/O ports consist of the following:
• One 5V DC-in 2-pin terminal block or jack (optional)
• Two USB 2.0 ports
• One LAN port
• One serial (RS-485) port
• One HDMI port
• One power button
• One USB 2.0 OTG port
5V DC-in
COM
DC-in
USB 2.0
LAN
HDMI
This 2-pin terminal block or jack (optional) is considered a low power solution. Connect a DC
power cord to this terminal block or jack (optional). Using a voltage more than the recom-
mended range may fail to boot the system or cause damage to the system board.
Jack (optional)
Terminal Block
-
+
USB OTG
Power
Button
