www.dfi .com
23
Chapter 3 Software User Guide
Chapter 3
3. Unzip Image package on your PC.
4. Yocto image: execute “\\[core type]\
yocto-emmc-fs051-[core type]-all.vbs”
.
For example, for DualLite CPU, execute “\\DualLite_core\yocto-emmc-fs051-DualLite-all.vbs”.
Android image: execute “\\[core type]\
android-emmc-fs051-[core type]-all.vbs”
.
For example, for DualLite CPU, execute
“\\DualLite_core\android-emmc-fs051-DualLite-all.vbs”.
5. You will see the device connected as “HID-compliant device.”
6. After all preparation is done,
click “Start” to burn the file. Wait until the process ends.
7. After the burning is done, click “Stop” and turn the power off.
8. Set the finger switch SW5 to the “eMMC Start Mode”: pins 1, 2, 5, 6, 8 on and 3, 4, 7 off.
ON
1 2 3 4 5 6 7 8
9. Power-on the device again to reboot it into the system.
