1
Introduction
11
Wake-On-Ring
This feature allows the system that is in the Suspend mode or Soft
Power Off mode to wake-up/power-on to respond to calls coming
through an internal or external modem. Refer to Wake-On-Ring
Connector in chapter 2 and Resume On LAN/Ring in the Power
Management Setup section in chapter 3 for more information.
Important:
If you are using a modem add-in card, the 5VSB power source
of your power supply must support a minimum of
≥
720mA.
RTC Timer to Power-on the System
The RTC installed on the system board allows your system to
automatically power-on on the set date and time. Refer to Resume
On Alarm in the Power Management Setup section in chapter 3 for
more information.
Wake-On-LAN
The Wake-On-LAN function allows the network to remotely wake
up a Soft Power Down (Soft-Off) PC. Your LAN card must support
the remote wakeup function. Refer to Wake-On-LAN Connector in
chapter 2 and Resume On LAN/Ring in the Power Management
Setup section in chapter 3 for more information.
Important:
The 5VSB power source of your power supply must support a
minimum of
≥
720mA.
AC Power Failure Recovery
When power returns after an AC power failure, you may choose to
either power-on the system manually, let the system power-on
automatically or return to the state where you left off before power
failure occurs. Refer to PWR Lost Resume State in the Power
Management Setup section in chapter 3 for more information.
Содержание CA63-EN
Страница 1: ...CA63 SN CA63 EN Rev A System Board User s Manual 45210041...
Страница 13: ...2 Hardware Installation 13 2 1 System Board Layout Chapter 2 Hardware Installation CA63 SN VIA 82C693A 82C686A...
Страница 14: ...2 14 Hardware Installation CA63 EN VIA 82C693A 82C686B...
Страница 21: ...2 Hardware Installation 21 2 3 On Clear CMOS Data 1 2 On Normal default 1 2 3 1 2 3 8 Type Y and press Enter...