DFI CA63-EN, Руководство пользователя

Страница: 50 / 74

50
3
Award BIOS Setup Utility
PM Control by APM
Yes An Advanced Power Management device will be activated to
enhance the power saving mode and stop the CPU’s inter-
nal clock. Use this option in Windows
®
95/98/2000. (default)
No The system BIOS will ignore APM when initiating the Power
Management mode.
Video Off After
N/A The system BIOS will never turn off the screen.
Suspend The screen is off when the system is in the Suspend
mode.
Doze The screen is off when the system is in the Doze
mode.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This option will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Support Initializes display power management signaling. Use
this option if your video board supports it.
MODEM Use IRQ
This field is used to select an IRQ channel for the modem installed
in your system.
Soft-Off by PWRBTN
This field allows you to select the method of powering off your system.
Delay 4 Sec. If the power button is pushed and released in less
than 4 sec, the system enters the Suspend mode. The
purpose of this function is to prevent the system
from powering off in case you accidentally “hit” or
pushed the power button. Push and release again in
less than 4 sec to restore. Pushing the power button
for more than 4 seconds will power off the system.