www.dfi.com
Chapter 3 BIOS Setup
Chapter 7
36
Chapter 7 BIOS Setup
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
Type
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
WDT
Case Open
AC Power Loss
PC Health Status
Smart Fan Function
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
<Enable>
<3F8>
<IRQ4>
<RS232>
<Enable>
<2F8>
<IRQ3>
<RS232>
<Enable>
<3E8>
<IRQ4>
<Enable>
<2E8>
<IRQ3>
<Disable>
<Disable>
<Always off>
WDT
Enable or disable the watchdog function. If it is enabled, enter the watchdog time-out
value in seconds.
Case Open
Enable or disable the case open function.
AC Power Loss
Set the AC power loss to Always off or Always on. When set to Always off, the sys-
tem’s status will be power-off after power restoration from an AC power loss event.
When set to Always on, the system’s status will be power-on after power restoration
from an AC power loss event.
Configure Serial port using
options: [Disable] No Con
-
figuration [Enable] User
Configuration [Auto] EFI/
OS chooses configuration
PC Health Status
This section displays the system’s health information such as the CPU and system temperatures.
PC Health Status
Voltage
VCORE
VBAT
1V35_SM
3VSB
5V
+12V
Temperature
CPU (
o
C/
o
F)
System (
o
C/
o
F)
Fan Speed
SYS FAN 1
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
0.848 V
3.056 V
1.360 V
3.312 V
4.978 V
12.056 V
35 C/ 95 F
34 C/ 93 F
0 RPM
