DFI BPC 420-BW, Руководство пользователя

Страница: 33 / 50

www.dfi.com Chapter 3 BIOS Setup
Chapter 7
33
Chapter 7 BIOS Setup
USB Configuration
This configures the parameters of the USB 3.0 xHCI (eXtensible Host Controller Interface).
USB3.0 Support
Disabled
Disable USB XHCI Pre-Boot Support.
Enabled
Enable USB XHCI Pre-Boot Support.
SATA Configuration
This section configures the SATA controller.
DISABLED: Disables
SATA Controller
ENABLED: Enables SATA
Controller
SATA Configuration
SATA Controller
HDC Configure As

Serial ATA Port 0

Serial ATA Port 1
Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
<Enabled>
<AHCI>
[Not Installed]
[Not Installed]
SATA Controller
Enable or disable the Serial ATA controller(s).
HDC Configure As
The mode selection determines how the SATA controller(s) operates.
AHCI Mode
This option allows the serial ATA devices to use AHCI (Advanced Host Control-
ler Interface).
Serial ATA Port 0, and 1
Enable or disable the SATA port:
SATA Port 0 controls SATA Port 0.
SATA Port 1 controls the full-size Mini PCIe slot (mSATA).
Enable/Disable the USB
XHCI PreBoot Support
USB Configuration
USB3.0 Support
Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
<Enabled>