DFI BPC 420-BW, Руководство пользователя

Страница: 35 / 50

www.dfi.com Chapter 3 BIOS Setup
Chapter 7
35
Chapter 7 BIOS Setup
ME Configuration
This section configures settings of flashing the Intel
®
Management Engine firmware.
Me Fw Image Re-Flash
ME Configuration
Me Fw Image Re-Flash
Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
<Disabled>
Me Fw Image Re-Flash
Enable or disable flashing of the Intel
®
Management Engine firmware.
Super IO (SIO) Configuration
This section configures the system’s super I/O chip parameters.
Serial Port 1 to Serial Port 4
Configure the settings of each serial port.
• Disable: Disable this serial port.
• Enable: Enable this serial port.
Type
Choose RS232/RS422/RS485 (Peer-to-Peer) for the serial port type for COM port 1 and
COM port 2.
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
Type
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
WDT
Case Open
AC Power Loss

PC Health Status

Smart Fan Function
Advanced
F1 Help ↑/↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←/→ Select Item Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
<Enable>
<3F8>
<IRQ4>
<RS232>
<Enable>
<2F8>
<IRQ3>
<RS232>
<Enable>
<3E8>
<IRQ4>
<Enable>
<2E8>
<IRQ3>
<Disable>
<Disable>
<Always off>
Configure Serial port using
options: [Disable] No Con -
figuration [Enable] User
Configuration [Auto] EFI/
OS chooses configuration