www.dfi.com
11
Chapter 2 Getting Started
Chapter 2
Preparing the System
Before you start using the system, you need the following items:
•
AC power adapter
•
USB keyboard/mouse
•
Screwdriver
Installing Devices
The following devices can be installed in the system:
•
Memory module
•
mSATA card
•
Mini PCIe card
Configuring the BIOS
To get you started, you may need to change configurations such as the date, time and the
type of hard disk drive.
1. Power on the system.
2. After the memory test, the message “Press DEL to run setup” will appear on the screen.
Press the Delete key to enter the AMI BIOS setup utility.
Installing an Operating System
Most operating system software can be installed using a DVD or bootable USB drive. Be sure
to install a storage device.
1. Refer to the following chapters for information on installing a SATA drive or an mSATA
card.
2. Refer to your operating system manual for instructions on installing an operating system.
Installing the Drivers
The system requires you to install drivers for some devices to operate properly. Refer to the
Supported Software chapter for instructions on installing the drivers.
Chapter 2 - Getting Started
