2
Hardware Installation
27
The system board supports 4 USB ports. USB allows data exchange
between your computer and a wide range of simultaneously
accessible external Plug and Play peripherals. You must have the
proper drivers installed in your operating system to use the USB
ports. Refer to your operating systems manual or documentation.
Two onboard USB ports (CN2 - Black) are located at the ATX
double deck ports of the board. The J6 connector on the system
board allows you to connect the optional 3rd and 4th USB ports.
These optional USB ports, which are mounted on a card-edge
bracket, will be provided as an option. If you wish to use the
optional 3rd and 4th USB ports, install the card-edge bracket to the
system chassis then insert the connector that is attached to the USB
port cables to J6. The USB ports cable connector can be inserted
only if pin 1 of the cable is aligned with pin 1 of J6.
