2
36
Hardware Installation
2.7.15 Front Panel LEDs and Switches
SP-LED - ATX 5VSB Standby LED
This LED will light when the 5VSB power is active.
HD-LED: Primary/Secondary IDE LED
This LED will light when the hard drive is being accessed.
G-LED: Green LED
This LED will blink every second when the system is in the Suspend
mode.
SPEAKER: Speaker Connector
This connects to the speaker installed in the system chassis.
SP-SW: ATX Power Switch
Depending on the setting in the BIOS setup, this switch is a dual
function power button that will allow your system to enter the Soft-
Off or Suspend mode. Refer to Soft-Off By PBTN in the Power
Management Setup (Chapter 3).
G-SW: Green Switch
This switch will allow your system to enter the Suspend mode.
H-RST: Reset Switch
This switch allows you to reboot without having to power off the
system thus prolonging the life of the power supply or system.
