56
3
Award BIOS Setup Utility
Delay 4 Sec
Regardless of whether the Power Management field
is enabled or disabled, if the power button is
pushed and released in less than 4 sec, the system
enters the Suspend mode. The purpose of this
function is to prevent the system from powering off
in case you accidentally hit or pushed the power
button. Push and release again in less than 4 sec to
restore. Pushing the power button for more than 4
seconds will power off the system.
Instant-Off
Pressing and then releasing the power button at
once will immediately power off your system.
PWRON After PWR-Fail
Off
When power returns after an AC power failure, the
systems power is off. You must press the Power
button to power-on the system.
On
When power returns after an AC power failure, the
system will automatically power-on.
Former-Sts
When power returns after an AC power failure, the
system will return to the state where you left off
before power failure occurs. If the systems power is
off when AC power failure occurs, it will remain off
when power returns. If the systems power is on
when AC power failure occurs, the system will
power-on when power returns.
Wake-Up by PCI Card (PME)
This field should be set to Enabled only if your PCI card such as
LAN card or modem card uses the PCI PME (Power Management
Event) signal to remotely wake up the PC. Refer to the cards
documentation for more information.
USB Resume
This field, when enabled, allows you to use a USB device to wake up
the system.
