57
3
Award BIOS Setup Utility
RI Resume
Set this field to Enabled to use the Wake-On-Ring or Wake-On-
LAN function. The Wake-On-Ring function allows your system to
power-on to respond to calls coming through an external or internal
modem. Refer to Wake-On-Ring Connector in the chapter 2 for
more information.
If you are using a LAN card that supports the remote wake up
function, set this field to Enabled. The will allow the network to
remotely wake up a Soft Power Down (Soft-Off) PC. However, if
your system is in the Suspend mode, you can wake up the system
only through an IRQ or DMA interrupt. Refer to Wake-On-LAN
Connector in the chapter 2 for more information.
Modem USE IRQ
This field allows you to select an IRQ for your medem. The options
are: 3, 4, 5, 7, 9, 10, 11 and NA.
RTC Resume
Enabled
When Enabled, you can set the date and time
you would like the Soft Power Down (Soft-Off)
PC to power-on in the Date (of Month) Alarm
and Time (hh:mm:ss) Alarm fields. However, if
the system is being accessed by incoming calls or
the network (Resume On Ring/LAN) prior to the
date and time set in these fields, the system will
give priority to the incoming calls or network.
Disabled
Disables the automatic power-on function. (default)
Date (of Month) Alarm
0
The system will power-on everyday according to the
time set in the Time (hh:mm:ss) Alarm field.
1-31
Select a date you would like the system to power-on.
The system will power-on on the set date, and time set
in the Time (hh:mm:ss) Alarm field.
