www.dfi.com
15
2. Push down the other end of the card and secure it on the board with the provided
mounting screw.
Mounting screw
Installing a PCI or PCIe Expansion
Card
1. PCI and PCIe slots on the riser card inside the system are used to install the expansion
cards. To install the expansion cards, you need to first remove the slot plates and bracket by
uninstalling the mounting screws on the front chassis.
Slot plate
Mounting screw and bracket
Important:
When inserting expansion cards into the system unit, please select a standard card
within 190mm (as shown in the picture below) in order to fit expansion slots.
