www.dfi.com
11
The SATA drive bay can be easily accessed witout opening the system. However, the system
does not support hot-swapping hard drives; turn off the system first.
Use the following procedure to install SATA HDD or SSD to the system:
2. Slide the HDD into the drive bay. Note that the HDD should be positioned vertically with the
SATA power connector on top of the data connector to correctly engage with the system's
SATA connectors. Then close the drive bay and lock the handle.
SATA drive bay
SATA 2 SATA 1
SATA power
Connecotr
Drive bay handle
Chapter 3 - Installing the Devices
Notes:
1.
The slot is desgined to exactly fit a 2.5" SATA drive with 7mm thickness; it
cannot fit SATA drives with other sizes.
2.
Do not force to close the drive bay if the HDD is not correctly inserted.
1.
Locate the drive bay on the front panel and open it by releasing the handle.
