40
2
Hardware Installation
2.7.6 IrDA Connector
The system board is equipped with an IrDA connector for wireless
connectivity between your computer and peripheral devices. The
IRDA (Infr ared Data Association) specification suppor ts data
transfers of 115K baud at a distance of 1 meter.
Connect your IrDA cable to connector J3 on the system board.
Note:
The sequence of the pin functions on some IrDA cable may be
reversed from the pin function defined on the system board.
Make sure to connect the cable to the IrDA connector
according to their pin functions.
BIOS Setting
Select the type of IrDA standard suppor ted by your device in the
Integrated Peripherals submenu (“Onboard Super I/O Device” field)
of the BIOS. Refer to chapter 3 for more information.
Driver Installation
You may need to install the proper drivers in your operating system
to use the IrDA function. Refer to your operating system’s manual or
documentation for more information.
1
5
VCC
N. C.
IRRX
Ground
IRTX
