2
18
Hardware Installation
2.7 Jumper Settings for Wake-On-Keyboard/
Wake-On-Mouse
Wake-On-Keyboard/Wake-On-Mouse - Jumper JP1
The system board supports the Wake-On-
Keyboard/Wake-On-Mouse function. This
function allows you to use the keyboard or
PS/2 mouse to power-on the system. By
default, JP1 is disabled. To use this function,
set JP1 to 2-3 On. Keyboard/Mouse Power
On in the Integrated Peripherals setup of
the Award BIOS must be set accordingly.
Refer to chapter 3 for details.
Warning:
1. If JP1 was previously enabled with
a password set in the KB Power
On Password field, and now you
wish to disable the keyboard password function, make sure
to set the Keyboard/Mouse Power On field to Disabled
prior to setting JP1 to disabled. You will not be able to boot
up the system if you fail to do so.
2. The power button will not function once a keyboard
password has been set in the KB Power On Password
field of the Integrated Peripherals setup. You must type the
correct password to power-on the system.
3. The 5VSB power source of your power supply must
support
≥
720mA (minimum).
2-3 On: Enable
1-2 On: Disable
(default)
1
2
3
1
2
3
