43
3
Award BIOS Setup Utility
when AC power failure occurs, the system will
power-on when power returns.
Resume On Ring
With an external modem installed, the Modem Ring-on function will
allow your system to power-on to respond to incoming calls. By
default, the Resume on Ring field is Disabled. To use this function,
please follow the steps below.
1. Make sure the computer system is powered off.
2. Connect the external modem to the COM 1 or COM 2
serial port.
3. Switch on the power of the external modem.
4. Power-on the computer system. After the memory test, press
<Del> to enter the Award BIOS setup utility.
5. Select Power Management Setup and press <Enter>.
6. Enable the Resume on Ring field.
7. Press <Esc> to return to the main menu of the Award BIOS
setup utility. Select Save & Exit Setup and press <Enter>.
8. Type <Y> and press <Enter>.
Resume On LAN
With a LAN card installed, the Wake-On-LAN function allows
the network to remotely wake up a Soft Power Down (Soft-
Off) PC. However, if your system is in the Suspend mode, you
can wake-up the system only through an IRQ or DMA
interrupt. Make sure your LAN card supports the remote
wakeup function. To use this function, set this field to Enabled.
Refer to the Wake-On-LAN Connector section in chapter 2 of
this manual for more information.
Resume On Alarm
Enabled
When Enabled, you can s et the date and time you
would like the Soft Power Down (Soft-Off) PC to
power-on. However, if the system is being accessed by
incoming calls or the network (Resume On Ring/
LAN) prior to the date and time set in this field, the
system will give priority to the incoming calls or
