58
4
Supported Softwares
Enable
Click on the items you want to be monitored.
Faults Count (1 or 3)
This allows you to select the number of fault counts detected
before a warning message pop-up. "1" = The warning message will
pop-up once an error has been detected. "3" = The warning
message will pop-up after the error has been detected thrice.
The rightmost column of the screen shows the current value of
each monitored item. To set the highest and lowest limit of each
item, click on the arrow buttons in the Lowest Limit or Highest
Limit column. However, we
DO NOT
recommend that you
change the settings of the Voltages. Make sure to leave them in
their default setting.
To further configure the utility, select Configuration in the Tools
menu. The Monitoring Config. screen will appear.
(Click here for a clearer view of the screen)
